Products

Contact Us

  • Tel:(+1)949-769-0986
  • Fax:(+1)770-814-8879
  • Kevin@amr-metallurgy.com
  • sales@amr-metallurgy.com
  • Brief Introduction

    Purging Plugs

    Made from high-purity, high-density, high-strength corundum based materials and matrix-adjusted system(MAS), HT series of purging plugs, with the unique radiated through-slots structure, show the features of stable structure, high and adjustable gas-flow, high purging rate, good corrosion/erosion resistance and long service life etc.

    Made from high-technology ceramic and high-performance castables and with the traditional through-slots as gas channel, HC series of purging plugs, as new generation of ceramic-clad purging plugs, not only succeed the advantages of HT series of purging plugs, but also show higher purging rate as result of adopting high-temperature ceramic as gas channel.


    HT series of purging plugs
    Al2O3 + Cr2O3 % Min. 94 93 92  
    Al2O3 + Cr2O3 % Min.       92
    Bulk Density g/cm3 1500℃x3h Min. 3.00 3.10 3.20 3.10
    Cold Crushing Strength MPa 1500℃x3h Min. 80 80 100 80
    Modulus of rupture MPa 1500℃x3h Min. 12 15 20 18


    HC series of purging plugs
    Al2O3 + MgO + ZrO2 % Min. 99 98 98
    Bulk Density   g/cm3  1750℃x3h Min. 3.30 3.00 3.40
    Apparent Porosity  %  1750℃x3h Max. 10 15 10

     





     



    Purging Plugs